How To Make Mobile Stand with Hanger?

You might not understand the importance of a mobile stand until you need to make a one-hour video call or watch a movie comfortably while lying flat on a sofa or a bed. These situations make one see the importance of knowing how to make mobile stand from hanger.

Usually, when we feel discomfort, we try to balance our mobiles on tables, books, sofas, etc. This is where mobile stands come in. Mobile stands are objects we use to hold our phones In place while we’re using them. Mobile stands are great for watching videos, making conference calls, video calls, studying, etc.

Even though stands are always cheap to purchase and readily available, wouldn’t you love to make one yourself? If you’re looking to replace your old mobile stand or just looking for a DIY project that involves recycling, then learning how to make mobile stand from hanger will interest you.

Can Mobile Stands Be Made From Hangers?

Mobile stands can be made from hangers, and the process is straightforward. All you need is a pair of pliers and a wire hanger, and you’re good to go. The process is easy, and even a little 10-year-old child can learn it and practice it in an hour or two.

Mobile stands can also be made from different materials like wire hangers, wood, paper clips, cardboard, etc.

How To Make Mobile Stand With Hanger

How To Make Mobile Stand With Hanger

Like I stated earlier, making a mobile stand with a hanger is a straightforward process, and you need just two things

  • A pair of pliers
  • A wire hanger

If you already have a plier and a wire hanger, follow the following process and you’ll have a new phone hanger in no time.

  • Step 1: cut the Wire to the required dimension;
  • Start by cutting 35 to 45 cm of wire. Bend the wire in half but do not twist it.
  • Step 2: Make two 90 degree bends; After cutting 35 to 45cm of the wire, mark the center. Once you have marked the center, measure 2.5 inches in either direction from the center. Bend two 90 degree angles from the same direction. Now, you have a three-sided wire with an open end.
  • Step 3: Bend each side 90 degrees, so they are perpendicular. From each side of the triangle, measure 1/2 inch. Bend the wires 90 degrees, perpendicular to the bends before.
  • Step 4: Bend each leg 45 degrees the opposite way. Bend again to 3/4 inch, about 45 degrees in the same direction on both sides.
  • Step 5: Bend each leg 90 degrees the opposite way.

If you do this, you’ll observe you now have a sort of Nike swoosh logo with the check design. Halfway up the swoosh, bend it about 90 degrees. This will hold your phone in place.

There you go! Your very own mobile phone stand hanger that can hold your phone in both vertical and horizontal mode.

Is It Better To Buy Or Make A Mobile Stand?

The answer to this question is relative. It actually depends on the individual in question. If you go online or to physical stores, you can get mobile stands for as cheap as $9 – $11, which frankly speaking, is not much money. To some people, spending $11 on a mobile stand is much better than going through the stress of making one out of a hanger or cardboard or whatever.

Is It Better To Buy Or Make A Mobile Stand

Also, the self-produced mobile stand might not have some of the features we may desire at certain moments. For example, sometimes we might need the mobile stand to hold our phone at a certain angle and that might not be possible. This will bring inconvenience. And when you combine this thought with the fact that the average mobile stand is cheap, you begin to ask yourself the age-old question, “what is the point?”

While for others, having the DIY (Do It Yourself) experience of making their own phone hanger gives them a sort of mental and psychological satisfaction that is worth even more than what they produced.

Some say it gives them a feeling of self-reliance when they can start a project and finish it by themselves. Others say it is a way of stimulating their brain as indulging themselves in such mental activities helps create other new ideas.

Also, if there is an urgent need for a mobile stand and in a case where one cannot wait to purchase one, then knowledge of how to make a mobile stand made from wire hangers will come in handy.

So as we can see, both sides have arguments going for them. There isn’t really any straightforward answer to the question.

But if one needs a mobile hanger that can turn at different angles and hold all types of devices, buying an already made mobile hanger is the best option.

If it’s an emergency or you just need to stimulate your mental juices, you can choose to learn How to make mobile stand with hangers.

If making your own mobile stand is too stressful for you or you just want a very high-quality mobile stand that will last longer and give you maximum satisfaction, then godonut has something for you.

The godonut mobile stand is shaped like a donut, and it is made from a very strong material. It is so strong it can withstand weights of up to 3000lb. And it can be held in both portrait and landscape mode in three different angles (45°/ 70°/ 90°). The overall size of this mobile stand is 4inch so it can be carried around even in your pockets.

This mobile stand is designed so that it can hold any type of device from iPad to tablets to Kindles, and any brand of phone. It doesn’t block the screen or button of the device in any way and also, you can charge the device while it’s on the stand. The godonut mobile stand comes with a 30-day money-back guarantee and can be gotten at their official website.

Final Thoughts

As we have established above, making your own mobile stand from a hanger gives you many mental and psychological satisfactions and also you get to use a mobile stand you made yourself proudly. With just five easy steps, you can learn How to make mobile stand with hanger.

Leave a Comment