When you’re working on a project that needs to be glued and finished on a tight schedule, super glue is what you need because of its fast drying strength and ability to hold surfaces together. Due to the urgency of your work, you might be looking for tips on how to make super glue dry faster; if so, then you have stumbled upon the right article.
How to make super glue dry faster? There are methods you can use to make superglue bond and dry faster, especially if you’re on a tight schedule. For instance, allowing air or using a fan as an air source can make the superglue dry more quickly. Did you know that baking soda can also be used to speed drying? All these will be explained in detail as you read further down.
Superglue, since its accidental discovery in 1942 by Dr. Harry Coover and his team at Eastman Kodak, Superglue has become an essential part of the home, workshop, and offices.
Making super glue dry faster is vital information that everyone who works with superglue should know.
- How Long Does It Take For Super Glue To Completely Dry?
- How To Make Superglue Dry Faster?
- What Is A Good Alternative For Superglue?
- What is Bondic?
- How To Use Bondic?
- Final words
How Long Does It Take For Super Glue To Completely Dry?
Quality glue should dry and set in seconds. The adhesive will then be fully cured in about 24hours. When looking for bonds that dry faster, always go for thin water glues. You can quicken the process, but you may not have to if you go for quality glues like the Lepage Super Glue.
You can, however, get superglue to dry faster, and this will be explained in detail in the next paragraph.
How To Make Superglue Dry Faster?
If you’re working on a tight schedule and you need your project to be finished quickly, then you need to know some simple things to do to make your superglue get dry and bond faster.
Below are some tips that will help you to get your superglue on in record time;
1. Prepare The Bonding Surface
A clean surface will make the glue dry faster; a dirty surface will not. It’s that simple. Make sure that you clean the surface of the dirt, oil, and debris that might have stained the surface area.
A clean surface will fasten the process and help it bond faster.
2. Increase The Inflow Of Air Into The Room
When you’re looking to speed up the process of your superglue drying, it is a good idea to open up the windows to allow air into the room, or you can also face a direct source of air to the work that needs to be glued. Doing this will make it glue faster.
It is also a good idea to open up windows as overexposure to glue chemicals can cause nausea, headache, and fainting spells.
3. Work At A Suitable Room Temperature
Superglue doesn’t do well in cold temperatures. Superglue will dry slower or may not even dry at cold room temperature.
Superglue does well in a room that has a temperature between 40-200°F. If you’re looking to get your project glue faster, then keep your room temperature at the ideal levels.
4. Apply Heat To The Surface
Applying heat to the surface is another great way to get your super glue to bond faster. You can use a natural heat source like the sun, or you can also use a hairdryer.
Set the dryer on low heat and keep it at least 12 inches away from the surface. Keeping the dryer too close to the surface will damage it. Keep the dryer facing the surface for only three minutes at a time.
5. Add Baking Soda To The Surface
Baking soda will accelerate the drying process; it will significantly reduce the time in which the glue will set.
After applying the glue, sprinkle a little baking soda on the bond, and it will set almost immediately.
However, be careful when applying because it will cause the glue to heat up. Remember, too much heat isn’t good for a bond.
Other ways on How to make super glue dry faster are;
- Use of chemical accelerators.
- Use of low heat-dryers.
- Use of electric heat blankets.
- Use of clamps to put more pressure on the surface.
- Use small amounts of glue and apply in thin layers.
What Is A Good Alternative For Superglue?
Sometimes, Ordinary superglue may not just cut it for you, causing you to want to look for something better. If you’re looking for a good alternative for superglue, then you might want to consider Bondic.
Bondic is an excellent alternative to the traditional superglue. The following paragraph will give you a quick review of why BONDIC is a superb alternative for superglue.
A quality glue like Bondic will dry in seconds and should completely set in 24 hours. If you’re looking for a high-quality bond that will flash dry, develop, and hold your work together, then you want to go for the Bondic.
What is Bondic?
A German scientist named Dr. Thomas originated the idea of a glue that dries in seconds using the latest liquid plastic welding process to attach to various materials.
It is the world’s first leading liquid plastic welding application which makes it an excellent alternative to superglue. It is super fast and doesn’t leave a mess or stick, unlike the regular superglue.
Do you know that Bondic can even fix glasses and hold things together that ordinary superglue may not be able to glue?
It comes with a UV light that is powered by a battery. The equipped Ultraviolet ensures lightning-fast drying and gives a solid hold when you point it at the glue you use on any material. Bondic comes in the shape of a pen which makes it very, very cool looking and also makes it easy to use.
Bondic is not toxic, unlike the traditional superglue that may be toxic under certain conditions. Bondic is a UV light controlled none toxic superglue. So you can rest easy when using it.
How To Use Bondic?
- Make rough surfaces on the material that you’re about to bond, as this will ensure a solid and permanent hold on what you want to glue. If you don’t want a permanent bond, you can make the surface smooth.
- 2. Make sure to use a sufficient amount of Bondic to the area you want to attach and fix.
- Unlike regular superglue, a Bondic adhesive will not harden until you point the UV light at it. So, make sure that you adjust and position the two surfaces you want to bond till they both lap and sit well. Then, point the UV light on the adhesive and get a firm hold.
- Avoid Sunlight when using Bondic. Please rely on the UV light pen that comes with it. The sun also has UV light; if the sun shines on the adhesive, it will bond before you have time to adjust it.
How To Make Superglue Dry Faster Is a question that people who work with different surfaces often ask because they need to get their jobs done quickly. Several techniques can be used to get your superglue to dry faster, and they’ve been thoroughly discussed in this article.